The Trac Configuration File

Trac configuration is done by editing the trac.ini config file, located in <projectenv>/conf/trac.ini. Changes to the configuration are usually reflected immediately, though changes to the [components] or [logging] sections will require restarting the web server. You may also need to restart the web server after creating a global configuration file when none was previously present.

Global Configuration

In versions prior to 0.11, the global configuration was by default located in $prefix/share/trac/conf/trac.ini or sometimes /etc/trac/trac.ini depending on the distribution. If you're upgrading, you may want to specify that file to inherit from. Literally, when you're upgrading to 0.11, you have to add an inherit-section to your project's trac.ini file. Additionally you have to move your customized templates and common images from $prefix/share/trac/... to the new location.

Global options will be merged with the environment-specific options, where local options override global options. The options file is specified as follows:

[inherit]
file = /usr/share/trac/conf/trac.ini

Note that you can also specify a global option file when creating a new project, by adding the option --inherit=/path/to/global/options to trac-admin's initenv command. If you would not do this but nevertheless intend to use a global option file with your new environment, you would have to go through the newly generated conf/trac.ini file and delete the entries that would otherwise override those set in the global file.

Reference

This is a brief reference of available configuration options.

[account-manager]

`account_changes_notify_addresses`	List of email addresses that get notified of user changes, ie, new user, password change and delete user.
`authentication_url`
`force_passwd_change`	Forge the user to change password when it's reset.
`generated_password_length`	Length of the randomly-generated passwords created when resetting the password for an account.
`hash_method`
`htdigest_realm`
`notify_actions`	Comma separated list of actions to notify of. Available actions 'new', 'change', 'delete'.
`password_file`	Path to the users file. Leave blank to locate the users file by reading svnserve.conf
`password_format`
`password_store`
`persistent_sessions`	Allow the user to be remembered across sessions without needing to re-authenticate. This is, user checks a "Remember Me" checkbox and, next time he visits the site, he'll be remembered
`phpbb_database`	Database URI for the phpBB database to auth against
`phpbb_hash_prefix`	Hash prefix used for phpBB passwords.
`phpbb_table_prefix`	Prefix for phpBB table names. This should be everything before "user" including an underscore if present.
`reset_password`	Set to false if there is no email system setup.
`script_auth_url`	The script URL pattern that will be fetched for the authentication result. Example: http://www.example.com/my_auth.php?u=<USERNAME>&p=<PASSWORD> Note that the <USERNAME> and <PASSWORD> strings will automatically be replaced by the proper user details.

[announcer]

`always_notify_cc`	The always_notify_cc will notify users in the cc field by default when a ticket is modified.
`always_notify_cc_distributor`	Comma-separated list of distributors to send the message to by default. ex. email, xmpp
`always_notify_component_owner`	Whether or not to notify the owner of the ticket's component. The user can override this setting in their preferences.
`always_notify_component_owner_distributor`	Comma-separated list of distributors to send the message to by default. ex. email, xmpp
`always_notify_custom_cc`	The always_notify_custom_cc will notify the users in the custom cc field by default when a ticket is modified.
`always_notify_custom_cc_distributor`	Comma-separated list of distributors to send the message to by default. ex. email, xmpp
`always_notify_owner`	The always_notify_owner option mimics the option of the same name in the notification section, except users can override it in their preferences.
`always_notify_owner_distributor`	Comma-separated list of distributors to send the message to by default. ex. email, xmpp
`always_notify_reporter`	The always_notify_reporter will notify the ticket reporter when a ticket is modified by default.
`always_notify_reporter_distributor`	Comma-separated list of distributors to send the message to by default. ex. email, xmpp
`always_notify_user_admins`	Sent user account notification to admin users per default, so they may opt-out individually instead of requiring everyone to opt-in.
`always_notify_user_admins_distributor`	Comma-separated list of distributors to send the message to by default. ex. email, xmpp
`ctxtnav_names`	Text of context navigation entries. An empty list removes them from the context navigation bar.
`custom_cc_fields`	Field names that contain users that should be notified on ticket changes
`default_email_format`	The default mime type of the email notifications. This can be overridden on a per user basis through the announcer preferences panel.
`email_address_resolvers`
`email_always_bcc`	Email addresses specified here will always be bcc'd on all announcements. This setting is dangerous if accountmanager is present.
`email_always_cc`	Email addresses specified here will always be cc'd on all announcements. This setting is dangerous if accountmanager is present.
`email_crypto`	Enable cryptographically operation on email msg body. Empty string, the default for unset, disables all crypto operations. Valid values are: sign sign msg body with given privkey encrypt encrypt msg body with pubkeys of all recipients sign,encrypt sign, than encrypt msg body
`email_default_domain`	Default host/domain to append to address that do not specify one
`email_enabled`	Enable email notification.
`email_from`	Sender address to use in notification emails.
`email_from_name`	Sender name to use in notification emails.
`email_replyto`	Reply-To address to use in notification emails.
`email_sender`	Name of the component implementing `IEmailSender`. This component is used by the announcer system to send emails. Currently, `SmtpEmailSender` and `SendmailEmailSender` are provided.
`email_subject_prefix`	Text to prepend to subject line of notification emails. If the setting is not defined, then the [$project_name] prefix. If no prefix is desired, then specifying an empty option will disable it.
`email_threaded_realms`	These are realms with announcements that should be threaded emails. In order for email threads to work, the announcer system needs to give the email recreatable Message-IDs based on the resources in the realm. The resources must have a unique and immutable id, name or str() representation in it's realm
`email_to`	Default To: field
`filter_exception_realms`	The PermissionFilter? will filter announcements, for which the user doesn't have ${REALM}_VIEW permission. If there is some realm that doesn't use a permission called ${REALM}_VIEW, then you should add it to this list and create a custom filter to enforce it's permissions. Be careful, or permissions could be bypassed using the AnnouncerPlugin?.
`gpg_binary`	GnuPG binary name, allows for full path too. Value 'gpg' is same default as in python-gnupg itself. For usual installations location of the gpg binary is auto-detected.
`gpg_home`	Directory containing keyring files. In case of wrong configuration missing keyring files without content will be created in the configured location, provided necessary write permssion is granted for the corresponding parent directory.
`gpg_signing_key`	Keyid of private key (last 8 chars or more) used for signing. If unset, a private key will be selected from keyring automagicly. The password must be available i.e. provided by running gpg-agent or empty (bad security). On failing to unlock the private key, msg body will get emptied.
`ignore_cc_changes`	When true, the system will not send out announcement events if the only field that was changed was CC. A change to the CC field that happens at the same as another field will still result in an event being created.
`joinable_groups`	Joinable groups represent 'opt-in' groups that users may freely join. Enter a list of groups (without @) seperated by commas. The name of the groups should be a simple alphanumeric string. By adding the group name preceeded by @ (such as @sec for the sec group) to the CC field of a ticket, everyone in that group will receive an announcement when that ticket is changed.
`mime_encoding`	Specifies the MIME encoding scheme for emails. Valid options are 'base64' for Base64 encoding, 'qp' for Quoted-Printable, and 'none' for no encoding. Note that the no encoding means that non-ASCII characters in text are going to cause problems with notifications.
`never_notify_updater`	The never_notify_updater stops users from recieving announcements when they update tickets.
`never_notify_updater_distributor`	Comma-separated list of distributors to send the message to by default. ex. email, xmpp
`rcpt_allow_regexp`	A whitelist pattern to match any address to before adding to recipients list.
`rcpt_local_regexp`	A whitelist pattern to match any address, that should be considered local. This will be evaluated only if msg encryption is set too. Recipients with matching email addresses will continue to receive unencrypted email messages.
`subscription_resolvers`	Comma-separated list of subscription resolver components in the order they will be called.
`ticket_email_header_fields`	Comma-separated list of fields to appear in tickets. Use * to include all headers.
`ticket_email_subject`	Format string for ticket email subject. This is a mini genshi template that is passed the ticket event and action objects.
`ticket_link_with_comment`	Include last change anchor in the ticket URL.
`use_public_cc`	Recipients can see email addresses of other CC'ed recipients. If this option is disabled (the default), recipients are put on BCC
`use_threaded_delivery`	Do message delivery in a separate thread. Enabling this will improve responsiveness for requests that end up with an announcement being sent over email. It requires building Python with threading support enabled-- which is usually the case. To test, start Python and type 'import threading' to see if it raises an error.
`watchable_paths`	List of URL paths to allow watching. Globs are supported.
`wiki_email_diff`	Should a wiki diff be sent with emails?
`wiki_email_subject`	Format string for the wiki email subject. This is a mini genshi template and it is passed the page, event and action objects.

[attachment]

`max_size`	Maximum allowed file size (in bytes) for ticket and wiki attachments.
`render_unsafe_content`	Whether attachments should be rendered in the browser, or only made downloadable. Pretty much any file may be interpreted as HTML by the browser, which allows a malicious user to attach a file containing cross-site scripting attacks. For public sites where anonymous users can create attachments it is recommended to leave this option disabled (which is the default).

[blackmagic]

`gray_disabled`	If not set, disabled items will have their label striked through. Otherwise, this color will be used to gray them out. Suggested #cccccc.
`permissions`

[browser]

`color_scale`	Enable colorization of the age column. This uses the same color scale as the source code annotation: blue is older, red is newer. (since 0.11)
`downloadable_paths`	List of repository paths that can be downloaded. Leave the option empty if you want to disable all downloads, otherwise set it to a comma-separated list of authorized paths (those paths are glob patterns, i.e. "" can be used as a wild card) (since 0.10*)
`hide_properties`	Comma-separated list of version control properties to hide from the repository browser. (since 0.9)
`intermediate_color`	(r,g,b) color triple to use for the color corresponding to the intermediate color, if two linear interpolations are used for the color scale (see `intermediate_point`). If not set, the intermediate color between `oldest_color` and `newest_color` will be used. (since 0.11)
`intermediate_point`	If set to a value between 0 and 1 (exclusive), this will be the point chosen to set the `intermediate_color` for interpolating the color value. (since 0.11)
`newest_color`	(r,g,b) color triple to use for the color corresponding to the newest color, for the color scale used in blame or the browser age column if `color_scale` is enabled. (since 0.11)
`oldest_color`	(r,g,b) color triple to use for the color corresponding to the oldest color, for the color scale used in blame or the browser age column if `color_scale` is enabled. (since 0.11)
`oneliner_properties`	Comma-separated list of version control properties to render as oneliner wiki content in the repository browser. (since 0.11)
`render_unsafe_content`	Whether raw files should be rendered in the browser, or only made downloadable. Pretty much any file may be interpreted as HTML by the browser, which allows a malicious user to create a file containing cross-site scripting attacks. For open repositories where anyone can check-in a file, it is recommended to leave this option disabled (which is the default).
`wiki_properties`	Comma-separated list of version control properties to render as wiki content in the repository browser. (since 0.11)

[changeset]

`max_diff_bytes`	Maximum total size in bytes of the modified files (their old size plus their new size) for which the changeset view will attempt to show the diffs inlined (since 0.10).
`max_diff_files`	Maximum number of modified files for which the changeset view will attempt to show the diffs inlined (since 0.10).
`wiki_format_messages`	Whether wiki formatting should be applied to changeset messages. If this option is disabled, changeset messages will be rendered as pre-formatted text.

[downloads]

`ext`	List of file extensions allowed to upload.
`path`	Directory to store uploaded downloads.
`title`	Main navigation bar button title.
`unique_filename`	If enabled checks if uploaded file has unique name.
`visible_fields`	List of downloads table fields that should be visible to users on Downloads section.

[googlesitemap]

`change_frequency`	Change frequency of URLs. Valid values: always, hourly, daily, weekly, monthly, yearly, never. Disabled if empty.
`compress_sitemap`	Send sitemap compressed. Useful for larger sitemaps.
`compression_level`	Compression level. Value range: 1 (low) to 9 (high). Default: 6
`ignore_users`	Do not list wiki pages from this users (default: "trac")
`ignore_wikis`	List of wiki pages to not be included in sitemap
`list_realms`	Which realms should be listed. Supported are "wiki" and "ticket".
`notify_on`	Notify Google about a new sitemap on the listed actions. Valid values are: TICKET_CREATE, TICKET_DELETE, TICKET_MODIFY, WIKI_CREATE, WIKI_DELETE, WIKI_VERSION_DELETE, WIKI_MODIFY, WIKI_RENAME
`sitemappath`	Path of sitemap relative to Trac main URL (default: "sitemap.xml"). If this path ends in `.gz` the sidemap will automatically be compressed.

[header_logo]

`alt`	Alternative text for the header logo.
`height`	Height of the header logo image in pixels.
`link`	URL to link to from header logo.
`src`	URL of the image to use as header logo.
`width`	Width of the header logo image in pixels.

[httpauth]

`formats`	Request formats to force HTTP authentication on
`paths`	Paths to force HTTP authentication on.

[inherit]

`plugins_dir`	Path of the directory containing additional plugins. Plugins in that directory are loaded in addition to those in the directory of the environment `plugins`, with this one taking precedence. (since 0.11)
`templates_dir`	Path to the shared templates directory. Templates in that directory are loaded in addition to those in the environments `templates` directory, but the latter take precedence. (since 0.11)

[logging]

`log_file`	If `log_type` is `file`, this should be a path to the log-file.
`log_format`	Custom logging format. If nothing is set, the following will be used: Trac[$(module)s] $(levelname)s: $(message)s In addition to regular key names supported by the Python logger library library (see http://docs.python.org/lib/node422.html), one could use: - $(path)s the path for the current environment - $(basename)s the last path component of the current environment - $(project)s the project name Note the usage of `$(...)s` instead of `%(...)s` as the latter form would be interpreted by the ConfigParser? itself. Example: `($(thread)d) Trac[$(basename)s:$(module)s] $(levelname)s: $(message)s` (since 0.10.5)
`log_level`	Level of verbosity in log. Should be one of (`CRITICAL`, `ERROR`, `WARN`, `INFO`, `DEBUG`).
`log_type`	Logging facility to use. Should be one of (`none`, `file`, `stderr`, `syslog`, `winlog`).

[mastertickets]

`dot_path`	Path to the dot executable.
`gs_path`	Path to the ghostscript executable.
`use_gs`	If enabled, use ghostscript to produce nicer output.

[milestone]

stats_provider Name of the component implementing ITicketGroupStatsProvider, which is used to collect statistics on groups of tickets for display in the milestone views.

[mimeviewer]

`enscript_modes`	List of additional MIME types known by Enscript. For each, a tuple `mimetype:mode:quality` has to be specified, where `mimetype` is the MIME type, `mode` is the corresponding Enscript mode to be used for the conversion and `quality` is the quality ratio associated to this conversion. That can also be used to override the default quality ratio used by the Enscript render, which is 2 (since 0.10).
`enscript_path`	Path to the Enscript executable.
`max_preview_size`	Maximum file size for HTML preview. (since 0.9)
`mime_map`	List of additional MIME types and keyword mappings. Mappings are comma-separated, and for each MIME type, there's a colon (":") separated list of associated keywords or file extensions. (since 0.10)
`php_path`	Path to the PHP executable (since 0.9).
`pygments_default_style`	The default style to use for Pygments syntax highlighting.
`pygments_modes`	List of additional MIME types known by Pygments. For each, a tuple `mimetype:mode:quality` has to be specified, where `mimetype` is the MIME type, `mode` is the corresponding Pygments mode to be used for the conversion and `quality` is the quality ratio associated to this conversion. That can also be used to override the default quality ratio used by the Pygments render.
`silvercity_modes`	List of additional MIME types known by SilverCity?. For each, a tuple `mimetype:mode:quality` has to be specified, where `mimetype` is the MIME type, `mode` is the corresponding SilverCity? mode to be used for the conversion and `quality` is the quality ratio associated to this conversion. That can also be used to override the default quality ratio used by the SilverCity? render, which is 3 (since 0.10).
`tab_width`	Displayed tab width in file preview. (since 0.9)
`treat_as_binary`	Comma-separated list of MIME types that should be treated as binary data. (since 0.11.5)

[notification]

`admit_domains`	Comma-separated list of domains that should be considered as valid for email addresses (such as localdomain)
`always_notify_owner`	Always send notifications to the ticket owner (since 0.9).
`always_notify_reporter`	Always send notifications to any address in the reporter field.
`always_notify_updater`	Always send notifications to the person who causes the ticket property change and to any previous updater of that ticket.
`ignore_domains`	Comma-separated list of domains that should not be considered part of email addresses (for usernames with Kerberos domains)
`mime_encoding`	Specifies the MIME encoding scheme for emails. Valid options are 'base64' for Base64 encoding, 'qp' for Quoted-Printable, and 'none' for no encoding, in which case mails will be sent as 7bit if the content is all ASCII, or 8bit otherwise. (since 0.10)
`smtp_always_bcc`	Email address(es) to always send notifications to, addresses do not appear publicly (Bcc:). (since 0.10).
`smtp_always_cc`	Email address(es) to always send notifications to, addresses can be seen by all recipients (Cc:).
`smtp_default_domain`	Default host/domain to append to address that do not specify one
`smtp_enabled`	Enable SMTP (email) notification.
`smtp_from`	Sender address to use in notification emails.
`smtp_from_name`	Sender name to use in notification emails.
`smtp_password`	Password for SMTP server. (since 0.9).
`smtp_port`	SMTP server port to use for email notification.
`smtp_replyto`	Reply-To address to use in notification emails.
`smtp_server`	SMTP server hostname to use for email notifications.
`smtp_subject_prefix`	Text to prepend to subject line of notification emails. If the setting is not defined, then the [$project_name] prefix. If no prefix is desired, then specifying an empty option will disable it. (since 0.10.1).
`smtp_user`	Username for SMTP server. (since 0.9).
`ticket_subject_template`	A Genshi text template snippet used to get the notification subject. By default, the subject template is `$prefix #$ticket.id: $summary`. `$prefix` being the value of the `smtp_subject_prefix` option. (since 0.11)
`use_public_cc`	Recipients can see email addresses of other CC'ed recipients. If this option is disabled (the default), recipients are put on BCC (since 0.10).
`use_short_addr`	Permit email address without a host/domain (i.e. username only) The SMTP server should accept those addresses, and either append a FQDN or use local delivery (since 0.10).
`use_tls`	Use SSL/TLS to send notifications (since 0.10).

[project]

`admin`	E-Mail address of the project's administrator.
`admin_trac_url`	Base URL of a Trac instance where errors in this Trac should be reported. This can be an absolute or relative URL, or '.' to reference this Trac instance. An empty value will disable the reporting buttons. (since 0.11.3)
`descr`	Short description of the project.
`footer`	Page footer text (right-aligned).
`icon`	URL of the icon of the project.
`name`	Name of the project.
`url`	URL of the main project web site, usually the website in which the `base_url` resides.

[query]

`default_anonymous_query`	The default query for anonymous users. The query is either in query language syntax, or a URL query string starting with `?` as used in `query:` Trac links. (since 0.11.2)
`default_query`	The default query for authenticated users. The query is either in query language syntax, or a URL query string starting with `?` as used in `query:` Trac links. (since 0.11.2)
`items_per_page`	Number of tickets displayed per page in ticket queries, by default (since 0.11)

[report]

`items_per_page`	Number of tickets displayed per page in ticket reports, by default (since 0.11)
`items_per_page_rss`	Number of tickets displayed in the rss feeds for reports (since 0.11)

[revisionlog]

default_log_limit Default value for the limit argument in the TracRevisionLog (since 0.11).

[roadmap]

stats_provider Name of the component implementing ITicketGroupStatsProvider, which is used to collect statistics on groups of tickets for display in the roadmap views.

[search]

min_query_length Minimum length of query string allowed when performing a search.

[sendmail]

sendmail_path Path to the sendmail executable. The sendmail program must accept the -i and -f options.

[smtp]

`debuglevel`	Set to 1 for useful smtp debugging on stdout.
`password`	Password for SMTP server.
`port`	SMTP server port to use for email notification.
`server`	SMTP server hostname to use for email notifications.
`timeout`	SMTP server connection timeout. (requires python-2.6)
`use_ssl`	Use ssl for smtp connection.
`use_tls`	Use SSL/TLS to send notifications over SMTP.
`user`	Username for SMTP server.

[svn]

`branches`	Comma separated list of paths categorized as branches. If a path ends with '', then all the directory entries found below that path will be included. Example: `/trunk, /branches/, /projectAlpha/trunk, /sandbox/*`
`tags`	Comma separated list of paths categorized as tags. If a path ends with '', then all the directory entries found below that path will be included. Example: `/tags/, /projectAlpha/tags/A-1.0, /projectAlpha/tags/A-v1.1`

[theme]

`enable_css`	Enable or disable custom CSS from theme.
`theme`	The theme to use to style this Trac.

[ticket]

`default_cc`	Default cc: list for newly created tickets.
`default_component`	Default component for newly created tickets.
`default_description`	Default description for newly created tickets.
`default_keywords`	Default keywords for newly created tickets.
`default_milestone`	Default milestone for newly created tickets.
`default_owner`	Default owner for newly created tickets.
`default_priority`	Default priority for newly created tickets.
`default_resolution`	Default resolution for resolving (closing) tickets (since 0.11).
`default_severity`	Default severity for newly created tickets.
`default_summary`	Default summary (title) for newly created tickets.
`default_type`	Default type for newly created tickets (since 0.9).
`default_version`	Default version for newly created tickets.
`max_comment_size`	Don't accept tickets with a too big comment. (since 0.11.2)
`max_description_size`	Don't accept tickets with a too big description. (since 0.11).
`preserve_newlines`	Whether Wiki formatter should respect the new lines present in the Wiki text. If set to 'default', this is equivalent to 'yes' for new environments but keeps the old behavior for upgraded environments (i.e. 'no'). (since 0.11).
`restrict_owner`	Make the owner field of tickets use a drop-down menu. Be sure to understand the performance implications before activating this option. See Assign-to as Drop-Down List (since 0.9).
`workflow`	Ordered list of workflow controllers to use for ticket actions (since 0.11).

[timeline]

`abbreviated_messages`	Whether wiki-formatted event messages should be truncated or not. This only affects the default rendering, and can be overriden by specific event providers, see their own documentation. (Since 0.11)
`changeset_collapse_events`	Whether consecutive changesets from the same author having exactly the same message should be presented as one event. That event will link to the range of changesets in the log view. (since 0.11)
`changeset_long_messages`	Whether wiki-formatted changeset messages should be multiline or not. If this option is not specified or is false and `wiki_format_messages` is set to true, changeset messages will be single line only, losing some formatting (bullet points, etc).
`changeset_show_files`	Number of files to show (`-1` for unlimited, `0` to disable). This can also be `location`, for showing the common prefix for the changed files. (since 0.11).
`default_daysback`	Default number of days displayed in the Timeline, in days. (since 0.9.)
`max_daysback`	Maximum number of days (-1 for unlimited) displayable in the Timeline. (since 0.11)
`newticket_formatter`	Which formatter flavor (e.g. 'html' or 'oneliner') should be used when presenting the description for new tickets. If 'oneliner', the [timeline] abbreviated_messages option applies. (since 0.11).
`ticket_show_details`	Enable the display of all ticket changes in the timeline, not only open / close operations (since 0.9).

[trac]

`authz_file`	Path to Subversion authorization (authz) file
`authz_module_name`	The module prefix used in the authz_file.
`auto_reload`	Automatically reload template files after modification.
`backup_dir`	Database backup location
`base_url`	Reference URL for the Trac deployment. This is the base URL that will be used when producing documents that will be used outside of the web browsing context, like for example when inserting URLs pointing to Trac resources in notification e-mails.
`check_auth_ip`	Whether the IP address of the user should be checked for authentication (since 0.9).
`database`	Database connection string for this project
`debug_sql`	Show the SQL queries in the Trac log, at DEBUG level. (Since 0.11.5)
`default_charset`	Charset to be used when in doubt.
`default_handler`	Name of the component that handles requests to the base URL. Options include `TimelineModule`, `RoadmapModule`, `BrowserModule`, `QueryModule`, `ReportModule`, `TicketModule` and `WikiModule`. The default is `WikiModule`. (since 0.9)
`default_timezone`	The default timezone to use
`htdocs_location`	Base URL of the core static resources.
`ignore_auth_case`	Whether login names should be converted to lower case (since 0.9).
`mainnav`	Order of the items to display in the `mainnav` navigation bar, listed by IDs. See also TracNavigation.
`metanav`	Order of the items to display in the `metanav` navigation bar, listed by IDs. See also TracNavigation.
`mysqldump_path`	Location of mysqldump for MySQL database backups
`never_obfuscate_mailto`	Never obfuscate `mailto:` links explicitly written in the wiki, even if `show_email_addresses` is false or the user has not the EMAIL_VIEW permission (since 0.11.6).
`permission_policies`	List of components implementing `IPermissionPolicy`, in the order in which they will be applied. These components manage fine-grained access control to Trac resources. Defaults to the DefaultPermissionPolicy? (pre-0.11 behavior) and LegacyAttachmentPolicy? (map ATTACHMENT_* permissions to realm specific ones)
`permission_store`	Name of the component implementing `IPermissionStore`, which is used for managing user and group permissions.
`pg_dump_path`	Location of pg_dump for Postgres database backups
`repository_dir`	Path to local repository. This can also be a relative path (since 0.11).
`repository_type`	Repository connector type. (since 0.10)
`request_filters`	Ordered list of filters to apply to all requests (since 0.10).
`secure_cookies`	Restrict cookies to HTTPS connections. When true, set the `secure` flag on all cookies so that they are only sent to the server on HTTPS connections. Use this if your Trac instance is only accessible through HTTPS. (since 0.11.2)
`show_email_addresses`	Show email addresses instead of usernames. If false, we obfuscate email addresses (since 0.11).
`show_ip_addresses`	Show IP addresses for resource edits (e.g. wiki). (since 0.11.3).
`timeout`	Timeout value for database connection, in seconds. Use '0' to specify no timeout. (Since 0.11)
`use_base_url_for_redirect`	Optionally use `[trac] base_url` for redirects. In some configurations, usually involving running Trac behind a HTTP proxy, Trac can't automatically reconstruct the URL that is used to access it. You may need to use this option to force Trac to use the `base_url` setting also for redirects. This introduces the obvious limitation that this environment will only be usable when accessible from that URL, as redirects are frequently used. (since 0.10.5)

[tracwysiwyg]

wysiwyg_stylesheets Add stylesheets to the WYSIWYG editor

[translatedpages]

`base_language`	Base language to be used without prefix/suffix
`languages_page`	Page name of table containing available languages
`regexp`	Regular expression to match a language code
`template`	Page name template of translated pages

[wiki]

`ignore_missing_pages`	Enable/disable highlighting CamelCase links to missing pages (since 0.9).
`max_size`	Maximum allowed wiki page size in bytes. (since 0.11.2)
`render_unsafe_content`	Enable/disable the use of unsafe HTML tags such as `<script>` or `<embed>` with the HTML WikiProcessor (since 0.10.4). For public sites where anonymous users can edit the wiki it is recommended to leave this option disabled (which is the default).
`split_page_names`	Enable/disable splitting the WikiPageNames with space characters (since 0.10).

[wiki-notification]

`attach_diff`	Send `diff`'s as an attachment instead of inline in email body.
`banned_addresses`	A comma separated list of email addresses that should never be sent a notification email.
`from_name`	Sender name to use in notification emails. Defaults to project name.
`redirect_time`	The default seconds a redirect should take when watching/un-watching a wiki page
`smtp_always_bcc`	Comma separated list of email address(es) to always send notifications to. Addresses do not appear publicly (Bcc:).
`smtp_always_cc`	Comma separated list of email address(es) to always send notifications to. Addresses can be seen by all recipients (Cc:).
`smtp_from`	Sender address to use in notification emails.
`subject_template`	A Genshi text template snippet used to get the notification subject.
`use_public_cc`	Recipients can see email addresses of other CC'ed recipients. If this option is disabled(the default), recipients are put on BCC. (values: 1, on, enabled, true or 0, off, disabled, false)

[components]

This section is used to enable or disable components provided by plugins, as well as by Trac itself. The component to enable/disable is specified via the name of the option. Whether its enabled is determined by the option value; setting the value to enabled or on will enable the component, any other value (typically disabled or off) will disable the component.

The option name is either the fully qualified name of the components or the module/package prefix of the component. The former enables/disables a specific component, while the latter enables/disables any component in the specified package/module.

Consider the following configuration snippet:

[components]
trac.ticket.report.ReportModule = disabled
webadmin.* = enabled

The first option tells Trac to disable the report module. The second option instructs Trac to enable all components in the webadmin package. Note that the trailing wildcard is required for module/package matching.

See the Plugins page on About Trac to get the list of active components (requires CONFIG_VIEW permissions.)

[ticket-custom]

In this section, you can define additional fields for tickets. See TracTicketsCustomFields for more details.

[ticket-workflow]

(since 0.11)

The workflow for tickets is controlled by plugins. By default, there's only a ConfigurableTicketWorkflow component in charge. That component allows the workflow to be configured via this section in the trac.ini file. See TracWorkflow for more details.

[milestone-groups]

(since 0.11)

As the workflow for tickets is now configurable, there can be many ticket states, and simply displaying closed tickets vs. all the others is maybe not appropriate in all cases. This section enables one to easily create groups of states that will be shown in different colors in the milestone progress bar.

Example configuration (the default only has closed and active):

closed = closed
closed.order = 0                     # sequence number in the progress bar
closed.query_args = group=resolution # optional extra param for the query
closed.overall_completion = true     # indicates groups that count for overall completion percentage

new = new
new.order = 1
new.css_class = new
new.label = new

active = *                           # one catch-all group is allowed
active.order = 1
active.css_class = open              # CSS class for this interval
active.label = in progress           # Displayed label for this group

The definition consists in a comma-separated list of accepted status. Also, '*' means any status and could be used to associate all remaining states to one catch-all group.

The CSS class can be one of: new (yellow), open (no color) or closed (green). New styles can easily be added using the following selector: table.progress td.<class>

[svn:externals]

(since 0.11)

The TracBrowser for Subversion can interpret the svn:externals property of folders out of the box. However, if those externals are not using the http: protocol, or if a link to a different repository browser (such another Trac or ViewVC) is desired, then Trac needs to be able to map an external prefix to this other URL.

This mapping is done in the [svn:externals] section of the TracIni

Example:

[svn:externals]
1 = svn://server/repos1 http://trac/proj1/browser/$path?rev=$rev
2 = svn://server/repos2 http://trac/proj2/browser/$path?rev=$rev
3 = http://theirserver.org/svn/eng-soft       http://ourserver/viewvc/svn/$path/?pathrev=25914
4 = svn://anotherserver.com/tools_repository  http://ourserver/trac/support/browser/$path?rev=$rev

With the above, the svn://anotherserver.com/tools_repository/tags/1.1/tools external will be mapped to http://ourserver/trac/support/browser/tags/1.1/tools?rev= (and rev will be set to the appropriate revision number if the external additionally specifies a revision, see the SVN Book on externals for more details).

Note that the number used as a key in the above section is purely used as a place holder, as the URLs themselves can't be used as a key due to various limitations in the configuration file parser.

See also: TracGuide, TracAdmin, TracEnvironment

Download in other formats:

Plain Text

The Trac Configuration File

Table of Contents

Global Configuration

Reference

[account-manager]

[announcer]

[attachment]

[blackmagic]

[browser]

[changeset]

[downloads]

[googlesitemap]

[header_logo]

[httpauth]

[inherit]

[logging]

[mastertickets]

[milestone]

[mimeviewer]

[notification]

[project]

[query]

[report]

[revisionlog]

[roadmap]

[search]

[sendmail]

[smtp]

[svn]

[theme]

[ticket]

[timeline]

[trac]

[tracwysiwyg]

[translatedpages]

[wiki]

[wiki-notification]

[components]

[ticket-custom]

[ticket-workflow]

[milestone-groups]

[svn:externals]

Download in other formats: